1
英
語
／
E
N
G
L
IS
H
◆
Be sure to read the following Important Safety Instructions carefully and make sure that you
understand them thoroughly before using this tool.
◆
Always wear eye-protection at all times during use. If this is not observed, the rivet shaft
(cut-mandrel) may eject out when the rivets are cut and cause serious injury.
1. The air pressure should be kept within the range of 0.49 to 0.59 MPa (5 to 6 kgf/cm
2
, 71 to 85 psi).
¡
If an air pressure which is greater than this is used, the tool may become damaged, and injury or
damage to property may result.
2. Always attach the safety cap before use.
¡
If this is not observed, the rivet shafts (mandrel) may eject out when the rivets are cut and cause serious injury.
3. Be sure to remove the frame head when adding hydraulic oil.
¡
If the frame head is not removed before adding oil, excess oil may remain inside the tool, and damage to
the tool or personal injury may result.
4. Make sure that the tool and the air source are connected securely.
¡
If the threads of the joints do not match or if the screws are not inserted far enough, the air hose may
become disconnected during use and injury may result.
¡
Use hose bands to securely connect the air hose joint and air hose. If they are not connected securely
enough, the air hose may become disconnected during use and injury may result.
5. Turn off the air supply before disconnecting the tool from the air source.
¡
Compressed air may cause the air hose to whip around, and injury may result.
6. Check that all the tool parts are free from damage before use. Any damaged parts
should be repaired before the tool is used.
¡
If the tool is used while any parts are still damaged, injury may result.
¡
If the hose is damaged by objects being dropped onto it, for instance, the damaged part may rupture
and accident or injury may result.
7. If using in elevated locations, use a safety harness, and take care to avoid dropping
rivets or the tool itself.
¡
Accident or injury may result if this practice is not followed.
t
WARNING
IMPORTANT SAFETY INSTRUCTIONS
: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury to the operator.
: Indicates a potentially hazardous situation which, if not avoided, may result in moderate
injury to the operator or physical damage.
Moreover, failure to follow the instructions marked with the
symbol or cautions without a
symbol which appear in the text of this manual may also have serious results in some cases.
Always be sure to observe the instructions given in the Important Safety Instructions.
t
CAUTION
t
CAUTION
t
CAUTION
t
WARNING
◆
After reading this manual, keep it in a safe place where it is easily accessible to tool users.
◆
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
◆
The Important Safety Instructions are divided into
and
.
The differences between these two levels are described below.
t
CAUTION
t
WARNING
( ? P + . / / Q - K - F ̟Ηل /.,3,04 //8.6 ?K ɚĘȸ/
