Loblaws PC25762, Instruction Manual

Page: 22 / 48

D
G
15
16
STEP 10
a) Loosen the five pre-installed bolts on the right side of body assembly, and
allow ¼ bolt length to extend from the body assembly.
b) Align the large holes on the
14
right side shelf with the bolts extending from the
body assembly, and push down on the right side shelf until the shelf locks into
place. Tighten bolts by hand until secure.
c) Align the hole on the
14
right side shelf with the hole on the right side of the
control panel, insert
B
one bolt into the holes and tighten the bolt by hand
until secure.
d) Repeat the procedure for the
13
left side shelf.
e) Go back to tighten all bolts using the screwdriver provided.
STEP 11
a) Align the holes on the
16
side knob
seat with the holes on right side shelf
and side burner valve.
b) Insert
D
one bolt with
G
one flat
washer into each pre-drilled hole.
c) Tighten the bolts using the
screwdriver provided.
d) Insert the
15
side burner
knob onto the knob shaft
of side burner valve.
22
13
B
14
B
pre-installed bolt (10)