C
G
H
J
10
10
STEP 6
Drawer assembly: Make sure the drawer with the lighting stick is installed onto
the upper drawer support, and make sure the lower drawer is installed first.
a) Install lower drawer first: Pull out the two track supports on the
10
drawer.
b) Align the holes on the right track support with the holes on the
6
right
drawer support.
c) Insert
C
one bolt into each pre-drilled hole on the right track support and
drawer support, then place
G
one flat washer,
H
one spring washer and
J
one nut onto each bolt as shown. Tighten by hand until secure.
d) Repeat the procedure for the left track support and the left drawer support.
e) Go back and tighten all the bolts using the screwdriver provided.
f) Repeat the procedure to install the upper drawer.
19
Summary of Contents for PC25762
Page 46: ...46 NOTES AND OBSERVATIONS ...
Page 47: ...47 NOTES AND OBSERVATIONS ...