TO TEST
1. Make approx. 90 mL/3 fl oz of leak solution by mixing one part liquid
dishwashing soap with three parts water.
2. Make sure control knobs are in the OFF position.
3. Spray some solution on the cylinder valve up to the regulator connection
(see diagram).
4. Inspect the solution at the connections
for bubbles. If no bubbles appear,
the connection is secure.
5. If bubbles appear, you have a leak.
Go to Step 6.
6. Disconnect the regulator from the tank
and reconnect. Make sure the connection
is secured.
7. Retest with solution.
8. If you continue to see bubbles, replace the cylinder.
SECTION FOUR
LIGHTING INSTRUCTIONS
DANGER:
Failure to open lid while igniting the grill’s burners
or not waiting 5 minutes to allow gas to clear if the
grill does not light, may result in an explosion, which
could cause serious injury or death.
WARNING:
Never stand with your head directly over the grill
32
Summary of Contents for PC25762
Page 46: ...46 NOTES AND OBSERVATIONS ...
Page 47: ...47 NOTES AND OBSERVATIONS ...
