17
Instruction Manual
SECTION 6 - ADVANCED CONFIGURATION MENU
Selection Box
ON/OFF Icons
6.2
SET BATCH MODE
Batch mode applies only to the Pulse Multiply Mode
(
see Section. 5.2
). Use the UP and DOWN
buttons to select On or Off. Push the POWER
button to select the item and return to the advanced
configuration menu. Use the MODE button to
return to the advanced configuration menu without
saving changes.
Display Overview:
1.
ON/OFF Icons:
On
= Batch Mode ON (Stroke counter will
accumulate when pulses are detected during
an existing pump cycle)
Off
= Batch Mode OFF (Stroke counter will
reset if a pulse is detected during an existing
pump cycle)
2.
Selection Box:
Indicates the currently selected
item.
6.3
SET PULSE WIDTH
Use the UP and DOWN arrows to change
the value for the pulse width. The valid range is
4 mSec - 60 mSec (in 4 mSec increments). Push
the POWER button to save the value and
return to the advanced configuration menu. Use
the MODE button to return to the advanced
configuration menu without saving changes.
Display Overview:
Pulse width (in milliseconds)
6.4
SET LOCK MODE CONFIGURATION
This menu is used to select the desired lock mode
and to set the pass code; when you exit this menu,
the lock is not activated (
see Sec. 4.4 to activate
the lock
). Use the UP or DOWN button to
select the desired parameter. Use the POWER
button to toggle to parameter’s edit mode. A black
background indicates the parameter is in edit mode.
While in edit mode, use the UP and DOWN
buttons to set the value. While setting the unlock
pass code, use the POWER button to advance to
the next digit, and the MODE button to go back
to the prior digit. Use the MODE button to return
to the advanced configuration menu.
Example: Editing Lock Mode
Example: Editing Unlock Pass Code
Summary of Contents for ROYTRONIC EXCEL AD9 series
Page 2: ......
