24
3.8 Manual Outputs
The “MANUAL OUTPUTS” mode is provided to allow for manual
energizing of each relay output. Once the external devices have been
connected, they may be individually or collectively energized and tested.
Testing of all these components is recommended after system installation
and prior to system start up. Press “ENTER” to access these sub-menu
screens. Press the “UP” or “DOWN” key to move to each relay control
screen. Press “ENTER” from each relay output screen to energize that
output relay. Press “ENTER” a second time to de-energize that relay.
One or all of the relays may be energized in this manner. The output
relays will be de-energized if:
(1)
No keys are pressed for 3 minutes and the controller returns
to the “SYSTEM RUN” screen.
(2)
The operator manually de-energizes each relay output.
(3)
The operator manually exits the “MANUAL OUTPUT”
sub-menu screens.
BLEED
FEED
ALARM
EXIT
MANUAL OUTPUT
Press Enter to turn on LED’s
and energize outputs
Main Screen
MANUAL OUTPUT
Manually Energize Relay Outputs
ENTER
ENTER
ENTER
ENTER
ENTER
CONDUCTIVITY
SET POINT
LOW ALARM
HIGH ALARM
FEED
MANUAL OUTPUT
ADVANCED SETUP
TEMPERATURE
H
2
O METER
∆
DIFFERENTIAL
BOILER
(866) 433-6682 • (281) 359-8538 • sales@novatech-usa.com • www.novatech-usa.com