13
Flowmeter Input DC4000
2.4 Terminal Strip Layout for CE-DC4000
To access the wiring connections inside of the conductivity controller:
1. Disconnect the unit from electrical power.
2. Remove the four (4) screws and the junction box cover on the lower half of the
unit.
3. Consult the specific instructions below for the connections required.
AC Power Input
Hot:
TB2-1
Neutral:
TB2-3
Ground
TB4-1
Bleed / Blowdown / Control Relay Output
Hot (N.O.):
TB5-1
Hot (N.C.):
TB5-2
Neutral:
TB1-1
Ground:
To ground wire (twist connect) or GND post
Feed Output
Hot:
TB6-1
Neutral:
TB2-4
Ground:
To ground wire (twist connect) or GND post
Alarm Output
Hot:
TB6-2
Neutral:
TB1-2
Ground:
To ground wire (twist connect) or GND post
4-20 mAmp Output
( + )
TB9-1
( – )
TB9-2
(866) 433-6682 • (281) 359-8538 • [email protected] • www.novatech-usa.com
