36
•
Bitmap Viewer
•
Start the next measurement by using none recipe
— Select
Change Recipe
to select a different recipe for
the next scan. See also chapter
Multiple Scans with Different Rotation Angle
•
After measurement unload sample to
— Select
Select position
to automatically return the table to the
position selected with the
Load / Unload
function in the
Motor moving
area after the measurement has been
completed.
•
Scanning Info
— This area indicates the estimated remaining scanning time. This area also provides tips for
improving the currently used recipe.
•
Motor Control
— In this area, you can set the table X and Y coordinates. The
Motor Control
window is
depicted in the figure below:
The buttons are:
•
Move to Start
— Move the table to the set start position.
•
X+, X-, Y+, Y-
— Move the measurement table step-by-step so that the sensor moves to the indicated
direction – the scanning line moves on the sample to the indicated direction. The step in X direction is 11 mm
and the step in Y direction is 5 mm.
•
Set Start
— Set the current table position as the start position.
This also refreshes the
Start X
and
Start Y
values after the axes have been moved with the X/Y buttons.
•
Load / Unload (button next to Set Start)
— Move the table out so that you can
load or unload the sample. When you select
Load / Unload
, a pop-up window
below is opened:
Figure 36 Move Table to Loading Position
The options are:
•
Move the table to the left.
•
Move the table to the middle.
Figure 40 Motor Control
