11
Warning:
Danger of crushing! The UULA scanner weighs approximately 120 kg / 265 lbs. A pump lift is
required to handle the scanner.
12.
Remove the fastening strips around the sensor, and the fastening pins from the measurement table.
13.
Remove the lifting eyebolts by unscrewing them.
Figure 6 Removing the Lifting Eyebolts
Note:
It is extremely important that you remove the lifting eyebolts, as they will collide with the Z-axis
protection plate when the sensor mounting plate is raised.
14.
Fasten the Z-axis adjustment knob delivered with the package.
Fasten the locking screw in such a way that it enters the cavity on the axle.
