LMI Technologies chroma+scan 24 0 Series, User Manual

Page: 35 / 48

Selecting the “System” entry in the device tree will bring up (configuration) tabs “
Setup
”
and “
Calibration Target
” as well as the “
Free
” and “
Calibration
” (operation) tabs.
In the “Setup” tab, the number of groups and sensors per group can be defined. This will
affect the topology pane. General settings can also be changed from the “Setup” tab.
Where tab names match with the operation modes defined in …, the Run button (black
triangle) in the toolbox becomes active.
After clicking on this button FireSync Client starts the system in the selected mode and
visualizes the data in the leftmost part of the application window. Press the Stop button
(black square) to finish.