LMI Technologies chroma+scan 24 0 Series, User Manual

Page: 22 / 48

5.6.2 Electrical Information
Power Supply voltage +48 VDC
Power Supply current (Max.) 10A
Encoder signal voltage range +0.475 VDC to +18 VDC
Digital Input voltage range Logical LOW: 0VDC to +0.1 VDC
Logical HI: +3.4 VDC to +5 VDC
The +48VDC power supply must be isolated from AC ground. This
means that AC ground and DC ground are not connected.
If the user wishes to connect a higher voltage signal to the Digital Inputs,
an external current limiting resistor must be used. The input already has
an internal 330
Ω resistor. Add an external resistor of the appropriate
value such that the current to this input is less than 15mA .
5.6.3 LED Indicators
Indicator LED Description
Link Green LED Blinking: Ethernet traffic detected
Link Yellow LED On: Connected
Off: Not connected
UP Green LED Reserved for future use
UP Yellow LED Reserved for future use
DOWN Green LED Reserved for future use
DOWN Yellow LED Reserved for future use
Power Device is powered on
Input & Output connector Phoenix Contact MC 1,5/ 12-STF-3,5
Ext. Sync. connector Phoenix Contact MC 1,5/ 4-STF-3,5