LMI Technologies chroma+scan 24 0 Series, User Manual

Page: 21 / 48

Note: The direction of the X-axis can be changed on sensor by sensor basis. This is
controlled by the “Orientation” field in the configuration file. Please refer to section
6.4.3.
5.5 Cleaning
The windows on a sensor must be kept clean and free of debris at all time. If the
windows become dirty, clean them with an
ammonia-based cleaner only.
5.6 Master 2400
5.6.1 Mechanical Information
Link, UP, DOWN, Sensor ports RJ45
Power & Safety connector Phoenix Contact MC 1,5/ 6-STF-3,5
Encoder connector Phoenix Contact MC 1,5/ 8-STF-3,5
Axis Definition
x Field of view (along the laser line)
y Field of view (axis of motion or axis of time)
z
Range from a sensor to the object being
scanned.