22
Choose the latch-bolt position according to the opening direction of your door.
1. Push the latch-bolt locking mechanism upwards
2. Push the latch-bolt inside the lock and rotate it 180 degrees to change its orientation.
Free the latch-bolt and verify that the locking mechanism is back to the original position
10.
To change the direction of the latch-bolt
Note:
The orientation of the lock body should always be with the dead-bolt at the bottom
and the latch-bolt at the top as shown in the image of the next section.
Inside
Outside
Dead-bolt
Latch-bolt
Iron spindle
Latch-bolt locking
mechanism
11.
Front Panel installation
1. Insert 2 connecting columns in the front panel
2. Insert the adequate Steel square in the front panel
3. Pass the connection cable over the hole of the door
4. Align and insert the front panel in the lock body
