LK Floor Heating | Assembly Instructions | LK Room Temperature Control ICS-RF8
15
EN.33.C.104.1012
1.
Press
Mode
until
flashes, confirm with
Mode
.
2. Press right arrow until
AdPt
(adaptive) is displayed, confirm using
Mode
.
3. Select
ON/OFF
using the left/right arrow, confirm using Mode.
The function starts at the next change from
Economy
to
Comfort.
NOTE:
The above programming applies only to that specific room
thermostat.
Weekly program – disconnect the program temporarily
If required the weekly program can be disconnected on any thermostat separately.
The weekly program can be temporarily disabled as follows:
1. Increase/decrease the temperature by +/- key.
2. The temperature starts to flash.
3. When the temperature has stopped flashing, the temporary increase/decrease is activated.
4. The display shows neither
Comfort
nor
Economy
as the temporary increase/decrease is activated.
The temporary disconnection of the weekly program disappears when the program switches between
Economy/
Comfort
next time.
Alternatively, you can press
Mode
for 4 seconds to return to the weekly program.
Weekly program – disconnect the program constantly
If you wish, you can disconnect the weekly program constantly for any thermostat.
The weekly program is disconnected permanently as follows:
1. Increase/decrease the temperature by using the +/- key
2. Press
Mode
once when the temperature is flashing.
3. Symbol for constantly disconnected weekly programs appear on the display, see illus. 5 in the display
above. The display shows neither the
Comfort
nor
Economy
mode as the program is constantly
disconnected.
The constant disconnection of the weekly program is cancelled when you press
Mode
for 4 seconds
or
if the
termperature is increased/decreased without confirming the temperatur change with
Mode
. The display will
then show the
Comfort
or
Economy
mode in the operating part of the display (see illus. 12 in the display image
above).
Also see section entitled
Weekly program - activate
.
Holiday mode – set the temperature
The thermostat is equipped with a so-called "holiday function", enabling any thermostat to activate a general
drop in temperature in the unit for a selected number of days. The temperature is factory preset to +12°C degrees.
The temperature can be changed for individual thermostats as follows:
