Approx. A
Approx. A
100
Front
Frame
100
Caution
1
Mounting M-connection Metal Fittings
(1) Remove the push buttons on the beam.
(2) Press the M-connection beam connecting fitting
against the beam, mark the hole positions and then drill
I
9 through holes.
(3) Fix beams with M-connection beam connecting fittings
for R and beam spacers [12-1] to [12-3].
Refer to "Construction
Method for Basic Type"
for mounting for other
than the connection part.
Tip
A
1625
Mounting Number
4
(1) Insert the M/Y-connection ridgepole between the front frames.
(2) Fit an M-connection fixing fitting R to it and then fix it with [12-4].
M-Connection
SS Fixing Fitting
for R
Tip
M-Connection Fixing Fitting for R
[12-4]
I
4 x 13
Pan Head
Self Drilling Screw
Front
Frame
M/Y-Connection Ridgepole
Front Frame
Push
Button
Existing Hole
I
9 Processed
Hole (Through)
Beam
M-Connection Beam
Connecting Fitting for R
Remove the push
button
M-Connection
Beam Connecting
Fitting for R
Beam
Beam
Spacer
I
9 Copy Hole
(Through)
I
9 Copy Hole
(Through)
Beam Spacer
Beam
[12-2] M8 Hex Self-Lock Nut
[12-3] Plain Washer for M8
[12-1] M8 x 80
Hex
Bolt
[12-3] Plain Washer
for
M8
Check that the distance between
front frames is 15 mm.
Caution
Front Frame
15mm
Mount the M-connection fixing
fitting for R to the position shown
in the figure below.
If a beam is at the fixing fitting
mounting position, shift it before
mounting.
1
Mounting Connection Part
2
Mounting Connection Ridgepoles
For Independent Construction
Be sure to complete "Construction for Basic Type
9
Mounting
Roof Rafters" before this process.
-22-
