Livox Mid-360
Quick Start Guide
6
Connectors
The Livox Mid-360 uses the high-reliability M12 A-Code aviation connector (male).
Below is more information on the Livox Mid-360 M12 aviation connector.
M12 Aviation Connector Pin
Signal
Type
Description
1
Power+
Power
DC 9 V-27 V
2
Ground
Power
Ground
3
Ground
Power
Ground
4
Ethernet-TX+
Output
Ethernet-TX+
5
Ethernet-TX-
Output
Ethernet-TX-
6
Ethernet-RX+
Input
Ethernet-RX+
7
Ethernet-RX-
Input
Ethernet-RX-
8
LVTTL_IN
Input
3.3V LVTTL
Pulse per second
9
Power+
Power
DC 9 V-27 V
10
LVTTL_IN
Input
3.3V LVTTL
GPS input
11
LVTTL_OUT
Output
3.3V LVTTL
Reserved output IO
12
LVTTL_OUT
Output
3.3V LVTTL
Reserved output IO
Connection
The Livox Mid-360 supports two IP modes: dynamic IP address mode and static IP address mode.
All Livox Mid-360 LiDAR sensors are set to static IP address mode by default with an IP address of
192.168.1.1XX (XX stands for the last two digits of the Livox Mid-360 LiDAR sensor’s serial number). The
default subnet masks of the Livox Mid-360 LiDAR sensors are all 255.255.255.0 and their default gateways
are 192.168.1.1. Directly connect the Livox Mid-360 to the computer when using for the first time.
7
6
5
4
3
2
1
9
8
12 11
10
