To Produce Acidic Water (Living Water Essentials Faucet Control Panel)
• Press the ‘ACIDIC’ button to select the acidic pH desired. Continue to press the button until the desired acidic pH value is
displayed on the LED display. Acidic pH ranges from 5.0 to 6.5 pH
• Turn on the Living Water Essentials faucet. The acidic water selected will flow out of the upper spout in approximately 10
seconds. The alkaline water produced will flow out of the lower spout.
• The LED display will be RED.
• The Living Water Essentials faucet LED screen will go into the stand-by mode unless auto reverse flush (electrode
cleaning) is activated.
• After a short period, the LED display will go dark to conserve energy.
• The Living Water Essentials faucet will automatically return to the alkaline production mode when activated again.
To Produce Filtered OnlyWater (LivingWater Essentials Faucet Control Panel)
NOTE:
Filtered only water has a pH very close to the pH of your tap water. Most municipally provided water has a pH value of 7.0 or
slightly above. Use filtered water when preparing baby formula and when taking medicine.
• Press the ‘ALKALINE’ button until the “CLN” on the control panel is turned on.
• Turn on the LivingWater Essentials faucet.The filtered only water selected will flow out of the upper spout in approximately 10 seconds.
• The LED display will be green.
• Water will flow from BOTH the upper and lower spouts. DRINK THE WATER FLOW FROM THE UPPER SPOUT.
• The Living Water Essentials faucet LED screen will go into the stand-by mode unless auto reverse flush (electrode
cleaning) is activated.
• After a short period, the LED display will go dark to conserve energy.
12
13
L E D D I S P L AY
H
To Produce Alkaline Water (Living Water Essentials Faucet Control Panel)
• Press the ‘ALKALINE’ button to select the alkaline pH desired. Continue pressing the button until the desired alkaline
level is indicated on the ‘L’, ‘M’ and ‘H’ lights:
H: pH 9.0 ~ pH 9.5 (level 3 drinking water)
M: pH 8.5 ~ pH 9.0 (level 2 drinking water)
L: pH 8.0 ~ pH 8.5 (level 1 drinking water)
• Turn on the Living Water Essentials faucet.
• The alkaline water selected will flow out of the upper spout in approximately 10 seconds.
• Acidic water will flow out of the lower spout. DO NOT drink water from the lower spout when producing alkaline
drinking water.
• The LED display will be GREEN.
• The Living Water Essentials faucet LED screen will go into the stand-by mode unless auto reverse flush (electrode
cleaning) is activated.
• After a short period, the LED display will go dark to conserve energy.
LED screen
Light indicates reverse flush
Light indicates electrolysis stage
Alkaline water button
Light indicates acidic water mode
Acidic water button
Light indicates auto-flush mode
Set button
Light indicates filters need changing
Automatic Electrode Cleaning
• Your water ionizer has an automatic electrode cleaning feature built in that reverses water flow across the electrodes
keeping the system operating at peak efficiency. The system is programmed to enter the automatic cleaning mode after
each 30 L of ionized water is produced. After 2850 Liters, the unit requires use of a citric acid cleaning cartridge to clean
the system properly.
• The automatic cleaning cycle is short, only requiring one liter of water to clean the electrodes.
• After the cleaning cycle is complete, alkaline and acid water is available for use.
NOTE:
Cleaning cycle occurs every 30 Liters of total water usage. Total water usage includes both alkaline and acidic water produced.