Livezi Bravo H-DIG-18, Installation And Commissioning Manual

Page: 5 / 56

5
2 I
nstallatIon
G
uIdelInes
The following guidelines are intended for the installation of Livezi Bravo air conditioning
units used on domestic and commercial installations. Only suitably qualified trade personnel
should carry out installations of Split or Package Air Conditioning systems. Full compliance
with the local codes and regulations, which govern the installation of the equipment, is the
responsibility of the installer.
Before installation, the electrical power should be checked to determine if adequate power is
available with correct voltage to the site. The position of the equipment, after a survey of the
building and the duct layout, should meet the following criteria.
2.1 Outdoor Unit
• The outdoor unit should be placed in a position to satisfy the requirements of local
councils, building code, covenants etc.
• The unit must be installed on a firm level foundation, capable of supporting the unit’s
weight without movement.
• Provide sufficient clearance to ensure unrestricted circulation of condenser air, both air on
and air off must have free passage.
• A position of maximum shade from the afternoon sun is recommended, i.e. southern or
eastern aspect of the building.
• Provide the proper drainage of the condensate if necessary.
• Ensure position of the unit will not cause distress to occupants of the building or occupants
of neighbouring buildings i.e. do not place units near bedroom windows.
2.1.1 Required Clearance for Inverter Units
More than 60cm
More than 30cm
More than 60cm
More than 200cm
Air inlet
Air inlet
More than 30cm
Air outlet
(Wall or obstacle)
Maintain channel
600mm is necessary between 2 outdoor units