28
ls9.9e
TO cLEAR SELEcTION/RESET THE cONSOLE
Hold stop key for 3 seconds.
FINISHING YOUR WORKOUT
when your workout is complete, the monitor display will flash “FinisHed” and beep. Your
workout information will stay displayed on the console for 30-45 seconds and then reset.
A) QUIcK START Up
simply press staRt to begin working out. time will count up from 0:00. the resistance
level will default to level 1. incline will default to 0%.
B) SELEcT A pROGRAM
1) select a program using / and press enteR on the pRogRamming Button.
2) select a level using / and press enteR.
3) set time using / and press enteR.
4) press staRt or enteR to begin the program. note: if you press staRt before
pressing enteR, the program will begin and counts up from 0:00 for the manual
(p1) and constant watts (p4) programs, and count down from 30:00 for all other
programs. the level defaults to 1.
LS9.9E GETTING STARTED
1) check to make sure no objects are nearby that will hinder the movement of the elliptical.
2) plug in the power cord and turn the elliptical on. (switch is located at the bottom-front of the elliptical.)
3) You have the following options to start your workout:
programming
button
Summary of Contents for LS12.9E
Page 37: ...37 LIMITED HOME USE WARRANTY ...
