10
US-EN
Screw the Spotlight star knob
6
onto the
screw and tighten it hand-tight. Check that
the product is fixed firmly in place.
z
Positioning the Spotlight/
solar panel
Positioning model 1020-B
The Spotlight can be adjusted horizontally
(top/bottom) to an angle of up to 180° (see
Fig. D).
Loosen the two Spotlight star knobs
6
to
adjust the Spotlight (see Fig. B).
When the desired position is obtained,
tighten the star knobs again. If necessary,
use a screwdriver to hold the screw while
tightening the star knob.
Positioning model 1020-S
The Spotlight can be adjusted horizontally
(top/bottom) to an angle of up to 180° (see
Fig. H).
Loosen the wall bracket star knob
10
to
adjust the height of the Spotlight (see Fig.
H).
When the desired position is obtained,
tighten the star knob again.
Loosen the two Spotlight star knobs
9
to
adjust the angle (see Fig. H).
When the desired position is obtained,
tighten the star knob again. If necessary,
use a screwdriver to hold the screw while
tightening the star knob.
Note:
the motion sensor has a field of view
of up to 120°. Make sure that the motion
sensor faces directly towards the desired
detection zone.
Note:
to ensure the solar panel functions as
effectively as possible, make sure that the
surface of the solar panel
2
is not dirty.
Orientation:
The optimum alignment is facing south.
Choose an orientation facing slightly to the
west rather than slightly to the east.
z
Charging the rechargeable
battery
The battery is charged in all operating
modes. To optimize initial charging, charge
the product while it is turned off.
Note:
the battery is fully charged after it has
been well exposed to sunlight for 7 to 8
hours. The duration of the charging process
depends on the battery‘s charge level and
the quality of the sunlight.
z
Operation
The product can be operated in three
different modes. The operating mode is set
by means of the switch
5
�
Note:
the solar panel will turn on the
product in twilight or darkness in the mode
you have set.
Note:
battery charging via the solar panel
does not depend on which mode is selected.
The battery is charged continuously at all
times.
Mode 1
Press and hold the switch
5
for 3 seconds
to switch to “Mode 1”.
The Spotlight will light up once and then
switch to guide-light function (reduced
brightness).
If the motion sensor detects movement
within its range, the Spotlight will light up
at maximum brightness.
After approx. 15 seconds, it switches back
to guide-light function.
Mode 2
Press the switch
5
again to switch to
“Mode 2”.
The light will flicker twice and then switch off.
If the motion sensor detects movement
within its range, the Spotlight will light up
at maximum brightness.
After approx. 15 seconds, it will switch off
again�