10 GB
Startup procedure
Inserting / replacing batteries
Slide the battery cover
6
in the direction of the arrow and
remove it (see Fig. A).
Insert the batteries
5
into the battery compartment, paying
attention to polarity (+ and -).
Put the battery cover
6
back and slide it in the opposite
direction to the arrow (see Fig. B).
Hint:
Make sure that the battery cover
6
is securely locked in
place.
Secure / switch on / off the light
Note:
Ensure that the adhesive surfaces are free from grease and
dust.
Use the magnetic adhesive foil
3
if you want to attach the light
to a magnetic surface.
Remove the protective film from the magnetic adhesive foil
3
and attach to the back of the light (see Fig. C).
or
Stick 2 self-adhesive pads
4
to the back of the light and attach
to a level and dry surface (see Fig. D).
Switch the light on by pressing the middle of the transparent
object
1
.
Switch the light off by pressing the middle of the transparent
object
1
again.
Cleaning
Remove the batteries from the device prior to cleaning.
Use a dry cloth to clean the light - never use petrol, solvents or
cleaners that attack plastics.
Use a slightly moist cloth to remove any stubborn dirt.
