LIVARNO home 14160605L, Assembly, Operating And Safety Instructions

Page: 17 / 107

17 GB/IE
Prior to first use / Changing the light bulb Safety / Preparation / Prior to first use
Insert the wall plugs
7
into the drill holes
(see Fig. D).
Guide the mains connection cable (external)
6
through the rubber membrane of the connection
box
1
. Make sure that the double insulation of
the mains connection cable (external)
6
extends
at least 8 mm into the connection box
1
.
Secure the connection box
1
using the included
screws
8
(see Fig. E). Be aware of the “Up”
marking.
Now use the lustre terminal
2
to connect the
light’s connection cable
9
to the mains con-
nection cable (external)
6
. Ensure that each
wire of the mains connection cable (external) is
properly connected in the correct place: live
wire, black or brown = symbol L, neutral wire,
blue = symbol N, protective earth wire, green,
yellow = (see Fig. F).
Secure the lamp body
4
using the correct
screws
5
on the connection box
1
(see Fig. G).
Screw the decorative screw
11
onto the deco-
rative cover
10
from below (see Fig. H).
Mount the light bulb
14
by turning it clockwise
into the bulb socket.
Secure the lamp head
13
on the lamp body
4
using the fixing screws
12
(see Fig. I).
14160705L:
Remove the lamp head screws
15
and take the
connection box
1
out of the wall cover
3
(see Fig. B).
Use the slotted holes on the connection box
1
intended for the screws
8
as a guide to mark
the drilling holes (see Fig. C).
Now drill the mounting holes (approx. Ø 6 mm,
depth approx. 40 mm). Be sure not to damage
the mains connection cable.
Insert the wall plugs
7
into the drill holes
(see Fig. D).
Guide the mains connection cable (external)
6
through the rubber membrane of the connection
box
1
. Make sure that the double insulation of
the mains connection cable (external)
6
extends
at least 8 mm into the connection box
1
.
Secure the connection box
1
using the included
screws
8
(see Fig. E). Be aware of the “Up”
marking.
Now use the lustre terminal
2
to connect the
light’s connection cable
9
to the mains con-
nection cable (external)
6
. Ensure that each
wire of the mains connection cable (external) is
properly connected in the correct place: live
wire, black or brown = symbol L, neutral wire,
blue = symbol N, protective earth wire, green,
yellow = (see Fig. F).
Secure the lamp head
13
using the correct
screws
15
on the connection box
1
(see Fig. G).
Screw the decorative screw
11
onto the deco-
rative cover
10
from below (see Fig. H).
Mount the light bulb
14
by turning it clockwise
into the bulb socket.
Secure the lamp body
4
on the lamp head
13
using the fixing screws
12
(see Fig. I).
Reinstall the fuse or switch on the circuit
breaker in the fuse box (I setting) (see Fig. K).
Your light is now ready to use.
Switching the lamp on / off
Use the wall switch to switch the light on or off.
Twilight sensor
The light bulb
14
has a twilight sensor. When twilight
begins, the light switches on automatically. When
it gets light (daylight), the light will automatically
switch off.
Note: When selecting the setup location, ensure
that the twilight sensor of the light bulb
14
is not
affected by other light sources, e.g. street lighting.
Changing the light bulb
Switch the lamp off.
DANGER OF ELECTRIC
SHOCK!
First disconnect the lamp from the mains. To do
this, remove the fuse or switch off the circuit
breaker in the fuse box (0 setting) (see Fig. A).
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
First, allow the lamp to cool down completely.