![background image](http://html1.mh-extra.com/html/little-wonder/brc-24-hydro/brc-24-hydro_operators-manual_1929686024.webp)
24
BRUSH CUTTER
TROUBLESHOOTING (cont.)
COMMON PROBLEMS
COMMON CAUSES
Extra vibration when engaging the
blade.
Make sure the throttle lever is set to the “STOP” position, engine
has stopped, parking brake is engaged and the blade has stopped
spinning before checking blade.
•
Check for a broken or bent blade. DO NOT straighten blade.
Replace bent or broken blade with a new Schiller Grounds Care, Inc.
blade.
•
If the blade appears to be in good condition, check the bolt
connecting the blade and verify that it is tightened and properly
seated.
•
If the problem still persists then contact a local dealer for service.
The blade will not spin.
•
Make sure the Blade lever on the left handle is being held down while
the engine is on.
•
Stop the engine, disconnect the spark plug wire and engage the
parking brake be fore checking. Check the condition of the blade belt
Reinstall, replace or retension as necessary. If the bade still doesn’t
operate, consult your dealer for service.
TROUBLESHOOTING
Summary of Contents for BRC-24 HYDRO
Page 26: ...26 BRUSH CUTTER...