Little Tikes Real Wood Adventures 657931C3 Owner'S Manual & Assembly Instructions Download Page 35 | Manualshive

Page: 35 / 48

Little Tikes Real Wood Adventures 657931C3 Owner'S Manual & Assembly Instructions Download Page 35

35

62

Step 40:

Attach (1) Rail Board (039) to the Tower Legs (001) using (2) Screws (S119). Ensure the

predrilled hole is near the bottom edge of the Rail Board and that the Rail Board is

aligned with the previously installed Rail Boards (056).

Step 41:

Attach (1) Rail Board (006) to the Tower Legs (002) using (2) Screws (S119). Ensure that

the Rail Board is aligned with the previously installed Rail Boards (056).

Step 94:

Attach (5) Door Connect Boards (058) to the Door Support Board and Door Board

using (20) Screws (S91). Ensure that the Door Connect Boards are flush against the

Door Support.

Step 95:

Attach (1) Door Connect Board (059) to the Door Support Board and Door Board

using (4) Screws (S91). Ensure that the Door Connect Board is flush against the

previously installed Door Connect Board (058).

«
...
33
34
35
36
37
...
»

Summary of Contents for Real Wood Adventures 657931C3

















































Reviews:

No comments