Little Tikes Real Wood Adventures 657931C3 Owner'S Manual & Assembly Instructions Download Page 2

2

1. Have your receipt handy.
2. Locate the item number on the front of this manual.
3. Reference the parts list in this manual.

If any parts are damaged or missing, please contact 

consumer service before returning the item. 

LITTLE TIKES®

1-800-321-0183

• To reduce the risk of serious injury or death, you MUST read and follow these instructions before assembly and before use. Pay close 

attention to the important information, warnings and safety information. Keep and refer to these instructions often. Give them to any future 
owner of this unit. 

• The boxes containing the parts for this unit are very heavy. Do not attempt to lift by yourself. To prevent possible injury, at least two people 

are required to lift these boxes.

• After reviewing the entire manual, decide if you will need professional assistance assembling this unit.
• Before beginning assembly, separate and identify the contents of this unit to ensure you have all parts listed in this manual.
• If you cannot find a part, check the packing materials thoroughly, as loose parts and small pieces may have shifted in transit. 
• If any part is missing or damaged, contact Little Tikes Consumer Service:  www.littletikes.com or 1-800-321-0183.

READ THIS ENTIRE MANUAL THOROUGHLY BEFORE ASSEMBLY AND USE.

Please retain these instructions for future reference, and take a moment to write down this information for efficient service. 

It is recommended you attach your dated 

sales receipt to this page for future reference.

ITEM NUMBER:

PURCHASE LOCATION:

DATE OF PURCHASE:

INSTALLATION DATE:

INSTALLED BY:

8 a.m. - 8 p.m. EST ∙ 7 DAYS A WEEK

95

Step 160:

Insert (1) Ground Anchor Nut (HD24) into each Table Leg (072). Hammer (1) Ground 

Anchor (HD24) into the ground next to each Table Leg (072) as shown. Secure each 

Ground Anchor using (1) Ground Anchor Bolt (HD24).

Step 161:

Double check to ensure all hardware is fully tightened.

Summary of Contents for Real Wood Adventures 657931C3

















































Reviews: