6
ENG
3. At such disorders as deep vascular sclerosis, weak pulse wave and also in
patients with the prominent distortions of cardiac rhythm it may be dif
fi
cult to
measure the blood pressure accurately. IN SUCH CASES CONSULT A CERTIFIED
DOCTOR ABOUT APPLICATION OF THE ELECTRONIC DEVICE.
4. KEEP QUIET DURING A MEASUREMENT TO OBTAIN THE ACCURATE
VALUES OF YOUR BLOOD PRESSURE WITH THE ELECTRONIC Device.
Measure your blood pressure in the calm and comfortable conditions at the
indoor temperature. No eating an hour before measurement; no smoking,
taking tonic agents, alcohol 1.5-2 hours before measurement.
5. The accuracy of blood pressure measurement depends on whether the cuff
matches the size of your arm. THE CUFF SHOULD NOT BE TOO SMALL OR
TOO LARGE.
6. Wait 3 minutes between mea-
surements for the blood to restore
its circulation. However, the
persons with prominent athero-
sclerosis due to considerable loss
of vascular elasticity may need to
increase the wait time between
measurements (10-15 minutes).
This also refers to the patients suf-
fering for long from diabetes.
For more accurate determination
of blood pressure it is recom-
mended to make a series of 3
consecutive measurements and to
use the average value.
POWER SUPPLY OF THE DEVICE
BATTERY INSTALLATION
1. Open the cover of the battery
compartment and install 4 “AA” size
batteries according to polarity marked
inside the compartment. Do not use much
force to remove the cover of the battery
compartment (Fig. 1).
2. Close the battery cover.
Replace all batteries when the Low Battery
•
Indicator “
” appears on the screen or
when there is no any indication on the
screen. The Low Battery Indicator does
not show the discharge level.
Fig. 1
