9
ENG
7. If the rolled-up sleeve squeezes the arm
interfering with free blood
fl
ow the Device may
give inaccurate
fi
gures not corresponding to
your actual blood pressure.
MEASUREMENT PROCEDURE
1. Insert the Air Tube Plug into the Cuff Jack. Make 3-5
deep inhales and exhales before taking a measurement
and relax. Do not move, do not speak and do not toughen
your arm.
2. Press button O/I.
3. All symbols will appear on the display screen for a short
time (Fig. 3), two short sound signals will be given and the
Device will in
fl
ate automatically the air into the cuff.
At
fi
rst the in
fl
ation will stop at the level of 190 mmHg (Fig. 4).
4. After reaching the level of 190 mmHg the cuff will gradually
de
fl
ate. The
fi
gures on the screen will count back. The pulse
symbol“ ” will start
fl
ickering (Fig. 5).
AS THE BLOOD PRESSURE AND PULSE ARE
MEASURED DURING AIR DEFLATION FROM THE ARM
CUFF KEEP QUIET AND DO NOT MOVE YOUR ARM
AND DO NOT TOUGHEN YOUR ARM MUSCLES.
5. When the measurement is complete the sound signal
is given, the arm cuff completely deflates and your
measurement results
fl
ash on the screen (Fig. 6).
6. Press the O/I Button to switch off the Device. For taking
a new measurement repeat all steps described in this
paragraph.
TO OBTAIN THE ACCURATE RESULT MAKE INTERVAL
BETWEEN MEASUREMENTS TO RESTORE THE
BLOOD CIRCULATION. WAIT FOR AT LEAST 3 MINUTES
BEFORE MAKING A NEW MEASUREMENT.
Fig .3
Fig.6
Fig.4
Fig.5
