28
ACTION:
Line up the slots on the brake lever quick adjust screw. Insert the brake line through the slot. Twist
the quick adjust screw to tighten the cable in.
Brake cables wear out over time.
It is therefore essential to maintain them well and replace them when needed.
!
ACTION:
Tighten the brake calipers using (4) 5mm Hex Wrench. Brakes are pre-adjusted. For more information
on adjusting brakes, visit our website www.lithiumcycles.com/pages/owners
Note : Minimum brake caliper housing to fork torque: 13.5 (Nm) or 10lb/ft