19
11
ACTION:
Remove (B) steer tube bolt and (L) steer tube spacers. Hold the bottom of the tube to
keep the parts from separating. Have a second person help to lift the rear end of the frame to
keep the headset pieces in place. Keep a hand under the steering tube so that the assembly
stays in place.
HARDWARE:
#3 (8mm Hex wrench)
EXPLODED VIEW ------->
This is what the headset components look like.
Make sure they are kept in this order.
Keep one hand underneath to keep
components in place.
ACTION:
Set parts aside and remember their
order. You will install these back in the same
exact order. Your bike may come with three (3)
cylindrical spacers, however you only need two
(2). Only keep the thick spacer and one of the
thin spacers. You can discard the second thin
spacer.
