Buttons function instructions
LEARN MODE operation instructions
The loss of matched remote control would result in TV wall mount being unusable. The LEARN MODE is
used to learn how to use TV remote (ONLY suitable for the TV remote of popular brands.) to control TV
wall mount.
Note:
• TV remote can’t replace the all functions of matched remote control. Only LEARNING the three buttons
functions. With , and respectively.
•
T
he user must follow the rules below when using the TV remote to control TV wall mount.
S
elec
t the alternate buttons from the TV remote, and the button that can't direct control the TV.
• If you
need to erase all the button
functions LEARNED, press and hold for 4 seconds and repeat
five times.
If you don't erase them, the new button functions LEARNED every time will overwrite the last button
functions LEARNED.
OK
14
13
10. The Remote Control Operating Instructions
Remote control operation instructions
STEP 1: When powered, the buzzer sounds once beep, TV wall
mount will be in standby state.
STEP 2: Forward and reverse installation choices (NOTE 1:
T
here are forward and reverse installations for the TV wall
m
o
unt. Sw
inging the TV wall mount to right against the wall
that de
faults to the forward installation. If it is the forward
installation, the STEP 2 is not required; If it is the reverse
installation, Press and hold for 5 seconds until the buzzer
sounds twice beep beep, Remote control is now successfully
set. NOTE 2: The TV w
a
ll mount provides 0°(be parallel to wall)
and 90º of lateral rotation (be perpendicular to wall).TV wall
mount has been set before they go out (Please don’t set it
without sp
ec
ial requirement).If you want to reset the swing
angle to 0°and 90º.Press and hold for 5 seconds and
repeat four times. The system will start automatic positioning:
First positioning TV w
all mount w
ith flat against the wall, then
positioning TV wa
ll mount wi
th 90°of lateral rotation until the TV
remote control
9. Placing the IR Receiver
Peel the backing paper. Place the IR receiver into desired position.
Make sure nothing will obstruct the transmission from where the TV will be viewed.
Do not plug into the power outlet until it is ready to be operated.
Do not open the electrical cover please.
G
E
Stop button
OK
Memory button1.Press and hold for 5 seconds, the buzzer will sound twice beep beep, LED light
will turn on for 1second, The memory is saved as location 1.
Memory button2.Press and hold for 5 seconds, the buzzer will sound twice beep beep, LED light
turn on for 1second, The memory is saved as location 2.
Forward and reverse installation choices button (Pressing the button is invalid once in the working
condition).
+
Learning button, Please read the instructions below for more info.
+
To recall the button(location 1). Press and release button, and then press button,
The TV wall mount will automatically swivel to the location1 after the buzzer sounds once.
+
To recall the button(location 2). Press and release button, and then press button,
The TV wall mount will automatically swivel to the location2 after the buzzer sounds once.
The left button. Press and release , the TV wall mount will swivel to the left until is pressed
or the TV wall mount swing to 90 degrees to stop.
OK
The right button. Press and release , the TV wall mount will swivel to the right until is pressed
or the TV wall mount swing to 0 degrees to stop.
OK
Follow the Key function instructions below to operate.
wall mount automatically stop at 90°position.)
STEP 3: Press and release
OK
to return the TV wall mount flat against the wall and hear one beep
from the buzzer, the system will then enter a working condition.
