Lithe Audio 06300 Installation Manual Download Page 6

Page: 6 / 8

6-2 For Recessed Back Screens or to Access A/V Inputs

Tighten all screws but do not over tighten.

Screw the adapter brackets onto the TV.

Position the adapter brackets as close as possible to the middle of the screen.

Note: Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen.

M-C/M-D/M-E

M-F

M-G

M-D/M-E

M-F

M-H

M-D/M-E

M-F

M-G

M-H

6-1 For Flat Back Screens

6. Installing the Adapter Brackets

M-A

M-B

M-C

M-F

Remove the screws on the adapter brackets

and keep the screws for later use.

Summary of Contents for 06300

Page 4: ... all attached hardware and components WARNING 4b For Solid Brick and Concrete Mounting Drill pilot holes 2 1 Mark the exact location of mounting holes W A W B 7mm W A W B W C W A X X Screw the wall mount onto the wall Reverse installation Forward installation Tighten the screw leaving a 7mm space from the wall H H H 7mm ...

Page 5: ...8 7 5 Installing the Decorative Covers and the Cable Clips C X X Screw the wall mount onto the wall H W C W A ...

Page 6: ...kets as close as possible to the middle of the screen Note Choose the appropriate screws washers and spacers if necessary according to the type of screen or or M C M D M E M F M G M G M D M E M F M H M D M E M F M G M H 6 1 For Flat Back Screens TV TV TV 6 Installing the Adapter Brackets M A M B M C M F Remove the screws on the adapter brackets and keep the screws for later use ...

Page 7: ...ment 90 or 90 or 7 Hooking the TV onto the Wall Mount Hook the TV over the swing arm Reinstall the bottom screws to secure the adapter brackets to the swing arm Important Make sure the TV is correctly hooked before releasing the TV To avoid the little tilt caused by weight you can tighten the adjustment screws to help level the TV H ...