7
TROUBLESHOOTING
REASON
CAUSE
REMEDY
The load will not
illuminate
Incorrect daylight sensor setting selected.
Adjust setting.
Load had failed.
Replace load.
Power is switched off.
Switch on.
The load is permanently
illuminated.
Continuous movement in the detection area.
Check detection area setting.
The lamp (Containing sensor) is installed in an
area too close to reflective surfaces, i.e. metal,
glass or concrete walls.
• Make sure installation area suitable with at least 30
cm space between lamp and surrounding reflective
surfaces.
• Reduce sensitivity (Detection are).
The load will not
illuminate despite
movement.
Speed of moving object is not in the range of 0.
5~3m/s or the detection radius is too small.
Check detection area setting.
MOTION SENSOR
INSTALLATION
MOTION SENSOR
INSTALLATION
Motion Sensor_Installation Instructions_v1.indd 7
2/16/2018 8:37:39 AM
