BCF BriteCor Canopy Installation Manual
Page
2
of
4
NOTES
•
WARNING
–
Risk of fire or electric shock.
•
WARNING - It is recommended that installation be
performed by a certified electrician.
•
All electrical connections must be in compliance with
local codes, ordinances or the national electrical code
(NEC). Contact your municipal building department to
learn about your local codes, permits and/or
inspections.
•
Do not connect this Luminaire to an electrical system
that does not provide means for equipment grounding.
Never use a fixture in a two-wire system that is not
grounded.
•
If dimming functionality is included, use only with
Litesheet approved dimmers.
•
This unit is not approved for use in ducted ceilings.
•
Do not use excessive force when manipulating cables
and wires.
•
WARNING
–
To prevent wiring damage or abrasion, do
not pinch wires between surfaces.
•
WARNING
–
Only connect Luminaire to the voltage
indicated by the Luminaire label. It is intended for
direct connection to this voltage. DO NOT connect to a
different or unknown voltage.
•
Enclosure is rated for Wet Location and IP65. When
installing incoming connections, all wire ports must be
sealed using similar rated hardware to maintain Wet
Location and IP65 rating.
Document #: 11-00036
Rev: B
Date: 4/12/2022
