LiteSheet Solutions
Page
3
of
4
CONTENTS OF KIT
•
BCF LED Luminaire
TOOLS AND ADDITIONAL PARTS REQUIRED
•
Mounting screws
•
Silicon sealant
•
#2 Philips head screw driver
•
Flat head screw driver
Preparation
1.
Turn off power source.
Installation
1.
Open luminaire by removing the lens (4 screws.)
2.
Knock out / drill holes in the rear housing for
mounting fixture to wall and for securement to
junction box (j-box not provided.)
3.
Apply silicon sealant (not provided) to any
unused holes to prevent water entry.
4.
Secure fixture to wall with two or more screws
(not provided).
5.
Secure fixture to junction box with screws (not
provided).
