32
3 Weekly
A weekly calendar will be displayed on screen Select
desired day(s), then press
ENTER
to confirm your
selection. When completed, select ‘‘OK’, then press
ENTER
.
You can select more than one day for the weekly mode.
For example, if your desired programs are broadcast
every Thursdays and Fridays, you can assign the timer
setting only once by selecting both Thursday and
Friday.
Timer_03_01
If you select ‘Daily’ or ‘Weekly’ as the recording fre-
quency, it is suggested to proceed with further setting
to your Timer Programs. Press
to select ‘Ad-
vanced’, then press
ENTER
. If you would like to desig-
nated a period of time to the timer program, select ‘With
Restriction’ . Otherwise, select ‘Without Restriction’.
For the recording result of setting restriction, see:
Timer Recording Frequency (p.46)
6.
When completed, select ‘OK’, then press
ENTER
to
save the setting and return to the Timer menu, or select
‘Cancel’, then press
ENTER
to discard current setting.
If there is any setting invalid(except overlap of timer
programs), the ‘OK’ button will be disabled. Press
to modify your settings.
For overlap of timer programs, see:
Notice for Timer Recording (p.33)
7.
On the Timer Record menu, select another item on the
list, then press
ENTER,
if you would like to set up
more timer programs.
If not, select ‘Exit’, then press
ENTER
. Or press
TIMER
to exit the Timer Record menu.
8.
Switch off the DVD recorder to activate the timer
recording function.
If you would like to delete a timer program set
previously, go to Timer Record menu, highlight the
bin icon located in the first column of the entry you
want to delete, then press
ENTER
.
VCR Plus+ Mode
(Select Models Only)
Timer_01_02
Storage capacity available on the destination disc for a
particular recording mode.
Current system date.
Current system time.
The page you are viewing.
The PlusCode number of your desired TV program(s).
Recording mode.
Indicate function of canceling designated program
setting. Highlight this icon and press
ENTER
to clear
settings.
Indicates a new Timer Program. Press to start setting a
Timer Program.
Exit: Press to exit the Timer Record menu.
Setting Timer Program
(Date/Time Mode)
1.
Press
TIMER
to display the Timer Record menu.
2.
Press
ENTER
to start a new setting, or press
to
select a previous setting which you would like to
modify.
3.
Set ‘Source’ (Signal Source), ‘Mode’ (recording
mode), ‘Repeat’ (recording frequency) ‘Start’ (Start
Time) and ‘End’ (End Time) for the timer program.
Press
to select one of the settings, then press
ENTER
to go to the sub-menu. Press
to select,
then press
ENTER
to confirm your selection. To enter
numbers, press number buttons (
0-9
) or
.
4.
If ‘TV’ is selected as the signal source, you will need
to enter TV channel.
Press
to select ‘Channel’ (TV Channel), then press
ENTER
to go to the sub-menu. Press
or number
buttons (
0-9
) to select a channel, then press
ENTER
to
confirm your selection.
5.
For ‘Repeat’ (recording frequency), if you select...
1
Once
You need to set the date. Go to ‘Date’, then press
ENTER
. Press number buttons (
0-9
) or
to
enter the date.
2
Daily
The Timer Record program will be automatically
set for each day until the setting is cancelled or the
destination medium has no more storage capacity.
