ECP-105T [EUM-C]
4
2. Operation
2-1 Zone Setting
2-1-1 EDX System
EDX is designed for architecture and environmental lighting. EDX can save scene and each EDX/ECP
panel can set Zone. ECP panel can control EDX (same zone number).
For instance: ECP panel (Zone=1) can control EDX (Zone=1)
One ECP panel can control one EDX, shown as below:
2-1-2 Purpose of Zone Setting
One ECP-105T can control 1-8 zones at the same time in EDX, before using the
panels, be confirm the zone controlled by each panel.
ECP-105T has two control modes: single-zone mode and multi-zone mode.
DIP.9 (ON): multi-zone mode;
DIP.9 (OFF): single-zone mode.
EDX
(Zone 1)
Signal
ECP Panel
(Zone 1)
