8
/
16
ASSEMBLING YOUR TILT-HEAD STAND MIXER
To Attach Flat Beater, Wire Whisk, Dough Hook or Mixing Blade
1. Turn speed dial to speed 0.
2. Unplug Stand Mixer or disconnect power.
3. Tilt motor head back by turning the tilt knob.
4. Insert beater into the beater connector and press upward and turn it to right to lock.
5. Plug into an outlet.
To Remove Dough Hook, Mixing Blade, Wire Whisk or Flat Beater
1. Turn speed dial to speed 0.
2. Unplug Stand Mixer or disconnect power.
3. Tilt motor head back.
4. Press beater upward and turn left.
5. Pull beater from beater connector.
To Attach Bowl
1. Turn speed dial to speed 0.
2. Unplug Stand Mixer or disconnect power.
3. Tilt motor head back.
4. Place bowl on bowl clamping plate.
5. Turn bowl gently into clockwise direction.
6. Plug into an outlet.
To Remove Bowl
1. Turn speed dial to speed 0.
2. Unplug Stand Mixer or disconnect power.
3. Tilt motor head back.
4. Turn bowl counterclockwise.
To Attach Pouring Shield
1. Turn speed dial to speed 0.
2. Unplug Stand Mixer or disconnect power.
3. Attach Flat Beater, Dough Hook, Mixing Blade or Wire Whisk and bowl.
4. From the front of the mixer, slide the Pouring Shield over the bowl until the shield is
centered. The
bottom rim of the shield should fit within the bowl.
To Remove Pouring Shield
1. Turn speed dial to speed 0.
2. Unplug Stand Mixer or disconnect power.
3. Lift the front of the Pouring Shield clear of the bowl rim and pull forward.
4. Remove attachment and bowl.