7
1.4 Personnel choice and personnel qualification; basic responsibilities
1.4.1
Work on the machine must only be performed by reliable personnel.
Observe the legal minimum age!
1.4.2
Only use trained or orientated personnel. Establish clear responsibilities
of the personnel for operating, changeover, servicing, and repairing the
machine!
1.4.3
Make sure that only authorised personnel work on the machine!
1.4.4
Establish the responsibility of the machine operator, also in respect to
traffic regulations, and enable him to refuse to follow instructions by third
parties that are contrary to safety!
1.4.5
Any personnel training, learning, being instructed, or currently involved in
general education may only work with the machine under the continual
supervision of an experienced person!
1.4.6
Work on the electrical equipment of the machine may only be carried out
by electricians or trained personnel under the management and
supervision of an electrician, and in accordance with the rules of
electronics.
1.5 Safety instructions for certain operation phases
1.5.1 Normal operation
1.5.1.1
Refrain from working in any manner that is questionable in regard to
safety!
1.5.1.2
Take measures to ensure that the machine is operated only in a safe,
functional condition!
1.5.1.3
At least once per shift check the machine for externally recognisable
damage and deficiencies! Any changes which occur (including operating
behaviour) must be reported immediately to the responsible post/person!
If necessary, immediately stop the machine and secure it!
1.5.1.4
Immediately stop and secure the machine in case of malfunctions!
Immediately correct malfunctions!
1.5.1.5
Before beginning work become familiar with the operating location and
working environment. The working environment includes, for example,
obstacles in the traffic area, bearing capacity of the floor, required
security of the construction site to the public traffic area and possibilities
for help in case of accidents.
1.5.1.6
You may not leave the floor cutter while the diesel motor is still running.
1.5.1.7
Do not leave the floor cutter with the brakes (Pos. 22) off.
1.5.1.8
When starting the diesel motor, the lever (Pos. 20) must always be in the
middle position.
