1. General Safety Precautions
1.1 Warning Labels and Symbols used in this Manual
Danger! Not following the instructions can result in serious injuries or even
death.
Caution! Not following the instructions can, under certain conditions, result in
injuries.
Note!
Not following the instructions can result in damage to the machine or
other
equipment.
1.2 General Safe Operating Procedures
Danger!
1.2.1 The machine has been manufactured in keeping with the most recent
technology and the recognised safety rules. Nevertheless there may be some
risk of a hazard to life and limb of the user or third persons or impairments of
the machine and other real assets respectively.
1.2.2 Use the machine only in good working condition and follow all procedures
concerning correct and safe operation, as outlined in the manual! This applies
specifically to malfunctions that can jeopardise safety!
1.2.3 This floor cutter is intended for cutting concrete or asphalt exclusively.
The cutting of wood, plastic material or metal (except concrete reinforcements)
is not permitted!
Any other utilisation of this floor cutter is considered inadmissible.
The manufacturer/supplier is not liable for any damage caused by undue
application.
Correct operation also requires following instructions in the operating
manual as well as inspection and maintenance procedures.
1.3 Organisational Measures
1.3.1 Always keep the operating manual close to the machine and easily accessible!
1.3.2 Follow all laws and regulations concerning accident prevention and environmental
compliance listed in the supplement to this operating manual. These regulations
can, for example, apply to the use of dangerous chemicals, personal protective
equipment, and traffic laws.
3
Summary of Contents for FS 27-E
