Lissmac Compactcut 900, Operating Manual

Page: 31 / 56

31/56
5.2. Preparations for starting
NOTICE
Cutting without obstacles
Damage from objects in the cutting area or the saw blade.
 Remove all obstacles from cutting area and provide sufficient illumination of working area.
The cut area can be labelled using a marking spray to orient the operator for cutting.
To be able to use the Floor saw safely and properly, the following pre-requisites must be fulfilled:

Check the Floor saw for damages, loose screw connections and completeness of the attaching parts.
 Inspecting the motor oil level.

Fuel tank must be filled with sufficient fuel.

A suitable saw blade, which meets the optimal conditions, must be mounted.

The water cooling system must be functional.
5.3. Moving or setting up the Floor saw
WARNING
Danger of injury from rotating saw blade
If rotating cutting blades are touched, clothing can be caught and extremities can be cut off.

When moving the machine the saw blade must be at a standstill.

Location changes with the saw blade rotating are prohibited.
Only reposition the Floor saw if
-
The combustion motor is turned off and the saw blade no longer rotates.
During moving the parking brake must be released. During this the operator must not leave the intended
position of the Floor saw.
The parking brake must be activated again immediately after repositioning!