Lissmac Compactcut 900, Operating Manual

Page: 11 / 56

11/56
Use personal protection equipment if necessary or required by regulations!
Keep all safety instructions and danger warnings on the Floor saw and in legible condition! Replace
safety and danger instructions, which are damaged or non-readable anymore.
For safety-related changes to the machine or its running behaviour, stop the machine immediately and
mark it accordingly. Report the problem to the responsible post/person!
No changes, removal or addition of parts without the written approval of the manufacturer! The
instructions of the tool maker must be followed.
Only use tested original replacement parts from the manufacturer!
Observe required or prescribed deadlines given in the operating manual for inspection.
Workshop equipment suitable for the work is absolutely necessary for performing maintenance
actions.
Machines and combustion engines may not be used in closed areas.
1.3. Personnel choice and personnel qualification; basic responsibilities
Only qualified personnel 18 years of age or older may operate the Floor saw independently. All
personnel must be trained in the operation and be explicitly, in writing, authorized by the company to
operate the Floor saw.
Establish responsibilities of the personnel for operating, changeover, servicing, and repairing the
machine!
Make sure that only authorized personnel works at the machine.
The operator must wear personal safety equipment according to the safety regulations, such as safety
shoes, safety gloves and safety glasses.
Remaining in the working area of the Floor saw unnecessarily is prohibited! Direct unauthorised
personnel, who are not working on the machine, away from the work area. Block off the working area,
if necessary.
During all movement of the Floor saw, operating personnel must ensure that they and other people are
not endangered. All obstacles which may hinder the operation or implementation of the machine at
the location of use must be moved out of the way.
Work on the electrical equipment of the machine may only be carried out by qualified electricians or
trained personnel under the management and supervision of a qualified electrician, and in accordance
with the rules of electronics.
Establish the responsibility of the machine operator, also in respect to traffic regulations, and enable
him to refuse to follow instructions by third parties that are contrary to safety!
Any personnel training, learning, being instructed, or currently involved in general education may only
work with the machine under the continual supervision of an experienced person!