LiquoSystems iFerm Nano Terminal, Operating Instructions Manual

Page: 43 / 64

43
2020-03
Global settings
43
Subject to change. |
Settings Brief description
Web interface* The Web interface special function enables you to access the terminal via the
network.
¨
Press on the field in order to allow or deactivate access to the terminal via
Web browser.
¨
If necessary, note the IP address in order to enter it in an end device’s
Web browser, or change the IP address so that the terminal uses an
address that is permitted in your network. To do this, press on the individ -
ual address areas in turn and change the respective block of numbers. For
further details, see “6.6 Web interface*” on page 34 .
Default Settings
¨
Press on the field in order to reset the terminal to the default settings. For
details, see “7.4 iFerm Nano Terminal: Default settings” on page 48 .
Attention!
Use this option only in exceptional cases!
If you reset, all settings that you have made will be lost,
see chapter “7.4 iFerm Nano Terminal: Default settings” on
page 48 .
In the right-hand side area of the first Global settings menu, you can make a number of settings
for all connected devices simultaneously, for example if all devices are to be operated in Mon-
itor mode. If you set Heating or Cooling as the common mode, you can also set opening and
closing of the valve. Common values can also be set for the setpoint temperature and the alarm
threshold.
All devices Setpoint
¨
Press in the field in order to define the setpoint temperature for all
devices. You can make other settings for individual device groups later.
Alarm
¨
Press on the field in order to define the alarm threshold for all devices.
You can make other settings for individual device groups later.
Operating mode
¨
Press on one of the fields in order to select a standard operating mode
Monitor , Heating , Cooling or Auto for all devices.
Information
If you want to make settings for just a few devices rather than
all of them, combine the devices and make group settings, see
chapter “6.4 Groupings*” on page 30 .
Valves
¨
If Heating or Cooling has been selected as the standard operating mode,
you can also permanently open or close all valves if necessary ( Valve
open , Valves closed or Valve auto ).
Information
If you want to make settings for just a few devices rather than
all of them, combine the devices and make group settings, see
chapter “6.4 Groupings*” on page 30 .
¨
Return to the start screen.
DE
EN
DE
DE
DE
DE
DE
DE