10
iFerm Nano Terminal
Installation
10
3.3
Connections and control elements
Pos. Brief description
1
Display with touch screen
2
Cable screw connection for data bus line 1
3
Additional cable screw connection for data bus
line
4
Cable screw connection for power connecting
cable
5
RJ45 socket with screw connection for LAN
4
Installation
4.1
Wall mounting
The two supplied brackets allow safe mounting of the
iFerm Nano Terminal
on walls or pillars. As delivered,
the brackets are connected to each other in pairs.
¨
Break each connected bracket into 2 parts at the
predetermined breaking point.
¨
Push the brackets into two holders opposite each
other on the rear of the housing. They engage
noticeably when slight pressure is applied to them.
Information
You need to pull very firmly on a
bracket in order to unlock it.
¨
Prepare the installation location for wall mounting. The horizontal spacing between the
mounted brackets is 100 mm, and the vertical spacing is 260 mm.
¨
Use suitable fastening material (screws, plugs etc.) in order to install
iFerm Nano Terminal
securely.
