33
2020-03
Special functions
33
Subject to change. |
6.5
Chiller*
If the
Chiller
special function is enabled, you can operate a chiller on the ID 31.
6.5.1
Chiller setup
Attention!
For the
Chiller
special function, it is essential that a
iFerm Nano Top KM ID31
is con-
nected, set to the device address ID 31 and activated.
Open setting
>
Home
>
Chiller
Button / area
Brief description
In the overview of the
Chiller
function, you
can see the current settings of the connected
device.
The curves are colour-coded:
–
Blue: Request chilling
–
Orange: Request heating
–
Red: Alarm A or B
–
Green: 2nd setpoint
¨
Switch the chiller to one of the following modes:
On
: The chiller is permanently switched on and is chilling (blue) or
heating (orange).
Off
: The chiller is permanently switched off.
Auto
: The chiller automatically switches on via the corresponding
collective switch as soon as a valve of a device is opened for the cor
-
responding mode (only if the
Collective switches
special function is
available).
¨
Show the information on the
Chiller
alarm or show again the last
warning notice displayed (only on
Comfort
mode).
/
¨
Switch over to the second setpoint value (only in
Comfort
mode).
/
¨
Switch over between the options
Chiller
and
Heat pump
(only in
Comfort
mode).
¨
Open the settings for the
Chiller
area.
DE
EN
DE
DE
DE
DE
DE
DE
