LiquoSystems iFerm Nano Tank, Operating Instructions Manual, Page: 8 / 32

8
iFerm Nano Tank
Product overview
y
Extreme temperatures caused by heat build-ups, frost,
UV light, direct sunlight etc. can cause irreparable
damage. Always maintain the specified ambient
temperatures, see “8.1 Technical data” on page 27 .
y
iFerm Nano Tank is protected against water jets (IP65).
However, avoid intensive contact with liquids (e.g. high-
pressure cleaners).
y
Lay cables so that they do not present a trip hazard and
away from sharp-edged objects. Ensure sufficient strain
relief and kink protection.
y
Clean the iFerm Nano Tank with a soft damp cloth. Do not
use any aggressive, scouring cleaning agents or cleaning
agents containing solvents.
y
Do not perform any repairs on iFerm Nano Tank . Follow
the instructions in the chapter “7 Maintenance and care”
on page 26 .
3 Product overview
iFerm Nano Tank keeps the process temperature in the tank
constant to the value of the specified target temperature,
as long as the cooling or heating medium required for this
is constantly available in a sufficient quantity. To achieve
this, the temperature probe sends the measured actual
temperature to the microprocessor that adjusts it to the
target temperature. Every deviation results in an adjustment
of the valve setting so that the tank’s heat exchanger can be
filled as required and the target temperature is maintained in
every process phase.