26
iFerm Nano Tank
Maintenance and care
7
Maintenance and care
iFerm Nano Tank
is designed for continuous and largely
maintenance-free operation. The following instructions will
help you to always keep
iFerm Nano Tank
in an operational
state and to immediately remedy any faults that occur.
Attention!
Regular factory inspections help ensure permanently
safe operation and that all parameters are reliably
adhered to. You should therefore have the inspections
carried out regularly every 2 years.
¨
Do not perform any repairs on
iFerm Nano Tank
.
¨
If in doubt, contact customer service, see
“8.5 Customer service” on page 30
.
iFerm Nano Tank
is protected against the ingress of dust and
water jets (IP65). Normally, simple cleaning measures are
sufficient. Follow the instructions below:
¨
Remove accumulated dust and dirt from
iFerm Nano Tank
and the connecting cables at regular intervals:
–
Use a soft, damp cloth to do this.
–
Do not use any aggressive, scouring cleaning agents or
cleaning agents containing solvents.
¨
Avoid intensive contact with liquids (e.g. by high-pressure
cleaners).