25
2017-07
Extended configuration
Subject to change. |
, 1x
¨
Select the
u-no
(
unit number
) parameter.
The SV area shows the current appliance
address.
/
¨
Set the desired appliance address; the values
1
–
30
are valid.
¨
End the process. The display switches over to
showing the temperature.
6.2.2 Activating and deactivating communication
(Only required in conjunction with
iFerm Nano Terminal
control unit.)
PV
SV
«
PF
«
«
‹
‹
cmwt
off
CMW
iFerm Nano Tank
can also be used in
portable single operation if the power is
supplied via the connecting cable with
bus cable. For this, simply deactivate
the communication connection to the
central control unit.
, 1x
¨
Call up the parameter level:
l.adj
display (
adjustment level
)
, 2x
¨
Select the
cmwt
(
communications writing
)
parameter. The SV area shows the current
setting.
/
¨
Select one of the following values:
–
on
(
on
): Communication is activated.
–
off
(
off
): Communication is deactivated.
, 1x
¨
End the process. The display switches over to
showing the temperature.
CMW
With communication activated, the display
constantly shows the message
CMW
.
EN
EN
EN
EN
EN
EN
EN
EN