Rev: 06.30.22
Page 9
CCD-0001575
A
Fig. 13
Releasing the Upper Bunk Trolleys
1.
Flip the locking mechanism tab (Fig. 12A) to the release position, where the long portion of the tab is
inside the C-channel. Repeat for the other locking mechanisms.
2.
Press the UP switch until the lower trolley disengages the upper bunk from the locking mechanism.
3.
Press the DOWN switch to bring down the upper bunk trolleys along with the lower trolleys.
A
B
Fig. 12
Lower Trolley: Sofa or Dinette Configuration
The lift system can be configured to accommodate a bed on the upper trolley and a sofa or dinette on the
lower trolleys. The sofa or dinette will need extra brackets that will lock into the lower trolleys.
NOTE:
Bracket shown without sofa or dinette attached. Consult the manufacturer's instructions for bracket
installation on sofa or dinette units.
Lowering the Arm
1.
Remove the lockpins securing both bracket arms (Fig. 13A).
2.
Pull up slightly on the bracket arm (sofa or dinette seat base) (Fig. 13B), then pull out.
3.
Gently lower the arm (sofa or dinette seat base).
4.
Re-insert lockpins.