Rev: 08.18.21
Page 11
CCD-0004099
3.
Raise the ramp door and attach the door cables (Fig. 14A) to the door cable brackets (Fig. 14B) with the
retainer pins (Fig. 14C), on both sides of the ramp door.
A
C
B
Fig. 14
4.
Make sure the ramp door and support wire cables on both sides of the door are clear of any obstructions.
5.
For both sides of the ramp door, raise the handle of the compression latch (Fig. 15B) so that it is parallel
with the ground.
6.
For both sides of the ramp door, twist the compression latch handle 90° in either direction (Fig. 15C) to
align the latch (Fig. 15D) in an open position to allow the ramp door to completely close in the door jamb.
7.
Gently raise the ramp door into the doorjamb.
8.
For both sides of the ramp door, lower the handle (Fig. 15B) and lock the compression latch (Fig. 15A).
Fig. 15
A
B
D
C
A
A method of support, or the assistance of another person, to support the ramp door when removing
or attaching the door cables to extend the door to the ramp position is recommended.
