Rev: 08.18.21
Page 6
CCD-0004099
NOTE:
Bungee locations on the outside rear of the patio railing (Fig. 6A), can be located at two different
positions (Figs. 6B or 6C). Length of bungee and location of the bungee bracket on the doorjamb
will vary due to OEM specifications.
B
C
Ramp
door in
Ramp
Position
A
A
Fig. 6
NOTE:
On alternate versions of the Lippert 3000 series patio rail kit, there will
NOT
be two front and rear
bungees. An alternate version of the Lippert 3000 Series will have a J-bolt (Fig. 3A) located at both
side patio railing front bases (Fig. 4A). Pull the yellow lanyard (Fig. 3B) and turn the J-bolt a quarter
turn (Fig. 3C). Raise the side patio rails into a 90 degree position (Fig. 4B) until it clicks into the J-bolt,
locking the patio rail into position. The J-bolt also holds the side rail panel down and in place when the
yellow lanyard is pulled out, turned a quarter turn and the patio railing is folded down into the stowed
position. The bungee cords (Fig. 6A) located at the rear of the patio rails now serve the same purpose.
